Innovative Optimization Design of the Wet Graphite Machining Center DC6060G: Unveiling the Secrets Based on CNC Milling Machines

In the field of graphite processing, the market has long been troubled by common issues in graphite machining centers. A significant problem is the corrosion and contamination of machine components by graphite dust and metal chips. According to industry research, nearly 70% of traditional graphite machining centers experience varying degrees of component damage within two years of use, which not only affects the machining accuracy but also shortens the service life of the machine.

Against this backdrop, the wet graphite machining center DC6060G emerges as a revolutionary solution. It is based on the innovative optimization design of the CNC milling machine DC6060A, aiming to address the above - mentioned pain points.

Optimized Design Based on CNC Milling Machine DC6060A

The DC6060G inherits the excellent performance of the DC6060A and makes a series of targeted optimizations. For example, in terms of the spindle system, the optimized design increases the spindle speed from 10,000 rpm of the DC6060A to 12,000 rpm, which significantly improves the machining efficiency. In actual tests, the machining time for a graphite mold has been reduced by about 20% compared with the DC6060A.

Fully Sealed Cover Design

One of the outstanding features of the DC6060G is its fully sealed cover design. Unlike ordinary machine tools, which are often exposed to graphite dust and metal chips, the fully sealed cover of the DC6060G effectively isolates the internal components of the machine from the external environment. In a comparative test, an ordinary machine tool and the DC6060G were used for continuous graphite machining for one month. After the test, it was found that the internal components of the ordinary machine tool were covered with a thick layer of graphite dust, while the internal components of the DC6060G remained clean, which greatly reduces the risk of component corrosion and failure.

Wet Flushing System

The wet flushing system of the DC6060G is another key innovation. The working principle of this system is to use a high - pressure water jet to continuously flush the machining area during the machining process. This not only effectively removes graphite dust and metal chips but also cools the cutting tool, which improves the cutting quality and extends the service life of the tool. In practical applications, the service life of the cutting tool has been extended by about 30% compared with that without the wet flushing system.

Real - World Customer Cases

Many customers have benefited from the DC6060G. For example, a graphite product manufacturing company in Germany was previously troubled by the high maintenance cost and low machining efficiency of its ordinary machining center. After purchasing the DC6060G, the company found that the machining accuracy has been improved by 15%, and the maintenance cost has been reduced by 40% within one year. Another customer in Japan reported that the surface finish of the graphite products produced by the DC6060G has reached a very high level, which has enhanced the competitiveness of their products in the market.

If you are interested in learning more about the wet graphite machining center DC6060G, please feel free to contact our online customer service or call our consulting hotline at +1 - 800 - 123 - 4567. We are looking forward to providing you with more detailed information and professional solutions.